请选择 进入手机版 | 继续访问电脑版
立即注册
 找回密码
 立即注册

扫一扫,访问微社区

检测FCC认证标签要求

  [复制链接]

2744

主题

2774

帖子

9696

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9696
QQ
3400 admin 发表于 2018-9-3 11:05:34
  标签要求
  ●  Lable尺寸大小不作要求,清晰可见即可
  ●  Lable内容雕刻、印刷产品外观上
  ●  位置应为:  在一永久平面上,  不可拆卸部件上(例如: 电池盖、拐角处)
  标签要求Label Requirement——SDoC
  ❶ Identification of the product, e.g., trade name, model, etc.产品标识: 商标、型号
  ❷  A statement that the product complies with the rules, as applicable #1;  产品适用的符合性声明
  ❸ The name and address, and telephone number, or internet contact information of the responsible party’s contact located in the United States.在美国可联系到的代理信息: 公司名、地址、电话、或网址
  Devices authorized under the SDoC procedure have the option to use the FCC logo to indicate compliance with the FCC rules 产品符合了 SDoC 认证流程, 则可以 FCC logo.
  【解析】
  ●  The compliance information must be provided in a form that an end-user can reasonably be expected to have the capability to access: the instruction manual, a separate product insert, computer disk, web page, or the device’s own electronic screen.可以通过以下方式体现: 说明书、插页、光碟、 网页、产品的显示屏
  ●  建议标签体现以下信息: FCC logo, Trade name, model
  标签要求Label Requirement ——SDoC Certification
  ❶ The product shall bear a nameplate or label with the FCC Identifier (FCC ID), The FCC ID must always be accessible when using the product.产品必须要有 FCC ID
  ❷ The placement of the FCC ID must be a physical label on the product, unless an e-label is used.体现 FCC ID 必须是物理标签 (除非使用了电子标签)
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  ❶ This device may not cause harmful interference, and
  ❷ This device must accept any interference received, including interference that may cause undesired operation
  【解析】
  ●  When the device is so small, or for such use that it is impracticable to label with a font size that is four-points or larger, then the FCC ID shall be placed in the user manual, and the FCC ID shall also be placed either on the device packaging or on a removable label attached to the device.如产品尺寸太小(不能放置 4 号字体), 则 FCC ID 可放置在说明书、包装盒、移动标签上.
  ●  建议标签体现以下信息: FCC ID, Trade name, model
  标签要求Label Requirement ——SDoC#1
  Products authorized under Part 15 using SDoC or Certification require a label containing one of the following compliance statements
  ❶ Receivers associated with licensed radio service operations:
  This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
  ❷ Stand-alone cable input selector switch:
  This device complies with part 15 of the FCC Rules for use with cable television service.
  ❸ All other devices:
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  ① This device may not cause harmful interference, and
  ② This device must accept any interference received, including interference that may cause undesired operation
  Products authorized under SDoC and Part 18 required to include a compliance statement similar to the following:
  “This device complies with Part 18 of the FCC Rules.”
  标签要求Label Requirement ——SDoC#1 Certification
  A host product shall use a physical label stating “Contains Transmitter Module FCC ID: XYZMODEL1,” or “Contains FCC IDs: XYZMODEL1, XYZMODEL2,” or shall use e-labeling
UFO检测认证网

 

                                                   文章来源UFO检测网,转载请注明




上一篇:纺织品抗菌防霉防螨检测标准以及测试项目
下一篇:RED认证标签要求
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

推荐阅读

微信扫一扫
咨询检测认证

QQ| Archiver|手机版|小黑屋| UFO检测认证网 ( 粤ICP备15025988号 )  

快速回复 返回顶部 返回列表